Atoms and matter
Atoms and orbitals
The lab uses two quantum models. Orbitals solves the one-electron problem exactly within the nonrelativistic Schrödinger model. Atom uses an approximation to show the electron clouds and shells of the elements. The different pictures help you ask different questions about the same kind of matter.
Two models in the lab
- Orbitals shows one electron bound to a nucleus. Neutral hydrogen, He⁺ and Li²⁺ all fit this model because each has one electron. The nuclear charge sets how tightly it is bound.
- Atom computes a spherically averaged cloud from a supplied electron configuration. It uses the same approximate Kohn–Sham model throughout the element explorer, including its Hydrogen page. Use Orbitals for hydrogen’s exact one-electron solutions.
- The periodic table lets you compare configurations, calculated sizes and element properties across all 118 elements. Select a tile to open its Atom view.
Try the difference with helium. Open neutral helium in Atom to see both electrons in the 1s subshell. In Orbitals, choose 1s and set nuclear charge Z to 2. That gives He⁺ with one electron, so the remaining electron feels the full attraction of both protons. The two clouds answer different physical questions even though their nuclei have the same charge.
Why hydrogen-like orbitals are exact
With one electron, the only potential in the field-free model is the Coulomb attraction to a point nucleus. It depends only on distance. The Schrödinger equation separates into a radial part and an angular part, both of which have known analytic solutions. The lab evaluates those solutions for the quantum numbers you choose.
The principal quantum number n sets the energy. The other two quantum numbers describe the orbital angular momentum and its projection in the complex basis. In this model 2s and 2p have the same energy even though their densities and nodes look different. The real basis combines angular states to give the directional orbitals often drawn in chemistry.
The basic model is nonrelativistic and uses a point nucleus. The State tab lets you include nuclear motion through the reduced mass. Spin, fine structure, the Lamb shift and nuclear size are outside this basic model. The Light and Fields panels use additional models for their specific experiments. The 3D display samples the analytic solution on a finite grid, and the points view shows a finite sample of possible measurements.
The one-electron equations
The radial function contains a Laguerre polynomial, and the angular function is a spherical harmonic. Here is a hartree, and is the reduced mass of an electron of mass and a nucleus of mass . Choosing a fixed nucleus sets the ratio to one.
Each component of a superposition picks up a phase . A single stationary state's phase changes without moving its density. In a superposition of different energies, the relative phase changes, so interference can move the density at a rate set by the energy difference.
How the lab approximates many-electron atoms
Electrons repel one another. In neutral helium, the potential seen by one electron depends on where the other electron is. The full wavefunction depends on both positions together. Each added electron introduces more coordinates and interactions, so the simple separation that solves hydrogen no longer works.
The lab uses Kohn–Sham density functional theory to compute an approximate ground-state electron density. It solves effective one-electron equations in a potential built from the nucleus, the average electrostatic repulsion, and a local approximation to exchange and correlation. It then adds the occupied orbitals’ densities and updates the potential. The Watch it converge experiment shows that iteration for neon.
The solver starts from the supplied subshell occupations. It uses the reference configuration where one is known and labels predictions for the heaviest elements. Electron density is averaged over directions, so the whole atom is spherical in the model. The directional orbitals you can isolate are effective orbitals that reproduce the model density when summed with their occupations. Their energies describe the effective equations. Use measured ionisation energies and spectral lines for comparisons with experiment.
The relativity switch adds scalar relativistic corrections to the radial equations. Try Gold without Einstein to see the change in gold’s 6s orbital. The calculation averages over spin and leaves out spin–orbit splitting. Agreement with NIST’s electronic-structure benchmarks verifies the numerical implementation against calculations using the same approximation. Measured atomic properties provide a separate comparison.
Read the cloud, surface, slice and points
In Orbitals, gives probability density. A small region with greater density is more likely to contain a position measurement. Colour shows the wavefunction’s phase. For a real orbital, amber and cyan mark its two signs. Both colours contribute to probability. A node is a place where the wavefunction vanishes.
- Volume projects the density into a cloud.
- Surface traces a constant-density boundary chosen to enclose a stated share of the probability. At 90%, a measurement lands outside that boundary 10% of the time.
- Slice shows density in a plane through the nucleus. Turn the view to find the planes and cones where the orbital is zero.
- Points draws samples of individual position measurements.
The radial chart adds up probability in a thin spherical shell at each distance, so its peak can be away from the nucleus even when the cloud is densest at the centre. For hydrogen 1s with the nucleus fixed, the volume density peaks at the nucleus, while the radial probability peaks one Bohr radius away.
In Atom, the whole-cloud colours distinguish principal shells. Shells uses a logarithmic radial display to make the layers visible, while Density shows the local electron density on a log scale. Select a subshell label or one of its orbital boxes at the bottom. For a single orbital, the View tab offers In atom, Volume, Surface and Slice.
Using the lab
Click any element in the table to open its atom. The Atom tab moves along Z one proton at a time, removes or adds electrons, and switches on relativity; the configuration bar along the bottom picks out one subshell, or one orbital of it, inside the cloud.
The State tab builds the state: choose n, l and m for each part of a superposition, and set its amplitude and phase. States with different energies make the cloud move when the clock runs, beating at the difference of their energies. The basis switch rewrites the same state in real or complex orbitals without changing it.
Measure draws position outcomes one by one, and the radial histogram builds up beside the theory. Measure energy collapses a superposition onto one level, with the probability the Born rule gives.
Everything you build is saved in your browser, and Share copies a link that holds the whole state.
| Keys | What they do |
|---|---|
| Arrow keys (table) | Move between elements; Enter opens the atom |
| Escape (atom) | Back to the table |
| Drag | Turn the atom or orbital |
| Scroll, pinch, + and − | Zoom |
| Arrow keys | Turn it (Shift: finer) |
| Space | Run or pause the clock |
| M | Measure position |
Read a spectrum
Open Spectrum above the bottom dock. Element spectra uses measured line wavelengths from the NIST Atomic Spectra Database. Choose an element and switch between Emission, where a gas gives off light at specific wavelengths, and Absorption, where a gas removes those wavelengths from a continuous source. Try sodium’s dark lines and compare their locations with the bright lines in Emission. The graph uses relative intensities whose modelled values depend on the temperature.
Simulated photons counts what the orbital lab emits. Start a decay from the Light tab. Each downward transition sends one photon with energy equal to the difference between the initial and final levels. The graph covers the visible band. The recorded line table includes ultraviolet and infrared wavelengths too. A 2p to 1s decay in hydrogen is ultraviolet, so its line appears in the table.
Try the Balmer series to build visible lines from repeated decays. Click two wavelengths to measure their separation, or focus the chart and use the arrow keys and Enter. The Fields panel has a separate comparison for hydrogen that shows how an electric or magnetic field splits a line.
The checks page runs the experiments’ numerical checks on your device, with comparisons to their models and reference data.
The experiments
36 ready-made states, each with its own guide and a check.
What an orbital is
- The ground state: The 1s cloud is densest at the nucleus, yet the likeliest distance is one Bohr radius.
- Radial nodes: Each s orbital adds a spherical shell where the electron is never found.
- Angular nodes: Planes and cones of zero probability give p, d and f orbitals their shapes.
- Boundary surfaces: The familiar orbital shapes are the surfaces holding 90% of the probability.
- Real and complex orbitals: The x-oriented p orbital combines the complex states m = +1 and m = −1.
- One state, many bases: The same n = 2 state written in different bases: the cloud never changes.
- Hybrid orbitals: sp³ is a superposition of 2s and 2p: four lobes at the tetrahedral angle.
- Closed shells are round: Fill every m of a subshell and the lobes add up to a perfect sphere.
- Measuring position: Each measurement gives one point; thousands of them rebuild the cloud.
- One electron, any nucleus: He⁺, Li²⁺ and U⁹¹⁺ are hydrogen with more charge: smaller and deeper.
- Exotic hydrogen: Swap the proton for a positron, or the electron for a muon, and the atom resizes.
Why the table has its shape
- Shells: Neon, argon, krypton and xenon: shells nested like an onion, the inner ones tiny.
- Shielding and penetration: Inner electrons hide the nucleus; 2s slips inside them and feels more of it.
- The order of filling: Subshells fill in order of n + l; lay the elements out that way and the table appears.
- 4s before 3d, and after: Potassium puts its electron in 4s; iron’s ions lose 4s first. Both are true.
- The exceptions: Twenty elements break the n + l rule. The rule was only ever a guide.
- Watch it converge: The solver guesses neon’s charge, solves, and guesses again until it stops changing.
- Orbital energy and ionisation: The computed outer orbital sits well above minus the measured ionisation energy.
- How big is an atom?: Atoms shrink across a period, grow down a group, and hafnium is no bigger than zirconium.
- The ionisation trend: Ionisation energy climbs across each period, with small dips at boron and oxygen.
- One table, many shapes: The same 118 elements as the standard table, the long form, Janet’s left-step and a spiral.
- The table through history: Slide back to 1869 and see the table Mendeleev had, with its gaps.
Light from atoms
- Beats make light: Mix 1s and 2p and the charge sloshes 2.47 million billion times a second.
- Selection rules: Mix 1s with 2s and nothing sloshes: Δl = ±1, and 2s lingers.
- The Balmer series: Excite hydrogen to n = 6 again and again; the red, cyan and violet lines build up.
- How long a state lasts: Hydrogen’s 2p lasts 1.6 ns on average, but each atom jumps at a random moment.
- Rabi oscillation: Shine a laser on resonance and the atom swings fully between 1s and 2p.
- Why neon glows red: Neon’s orange-red, sodium’s yellow and mercury’s blue, each from its own lines.
- Dark lines: Shine white light through cool sodium and two dark lines appear, as in sunlight.
- Hotter gas, new lines: Heat calcium from 3,000 to 10,000 K and its ion’s violet lines take over.
Past the textbook
- The Stark effect: An electric field splits n = 2 in three and pushes the electron to one side.
- The Zeeman effect: A magnetic field splits Lyman-α into components, then spin and orbit let go.
- Fine structure and the Lamb shift: n = 2 is three levels, not one: relativity splits it, and the vacuum moves 2s.
- A planet made of probability: Circular states round n = 25 make an electron that orbits, spreads and comes back.
- Gold without Einstein: Relativity shrinks gold’s 6s orbital by 14%, more than any neighbour’s.
- The superheavy elements: Past rutherfordium nothing is measured; oganesson’s shells blur together.
Every element
Each element has its own page, with its computed atom and its measured properties.
- Hydrogen
- Helium
- Lithium
- Beryllium
- Boron
- Carbon
- Nitrogen
- Oxygen
- Fluorine
- Neon
- Sodium
- Magnesium
- Aluminium
- Silicon
- Phosphorus
- Sulfur
- Chlorine
- Argon
- Potassium
- Calcium
- Scandium
- Titanium
- Vanadium
- Chromium
- Manganese
- Iron
- Cobalt
- Nickel
- Copper
- Zinc
- Gallium
- Germanium
- Arsenic
- Selenium
- Bromine
- Krypton
- Rubidium
- Strontium
- Yttrium
- Zirconium
- Niobium
- Molybdenum
- Technetium
- Ruthenium
- Rhodium
- Palladium
- Silver
- Cadmium
- Indium
- Tin
- Antimony
- Tellurium
- Iodine
- Xenon
- Caesium
- Barium
- Lanthanum
- Cerium
- Praseodymium
- Neodymium
- Promethium
- Samarium
- Europium
- Gadolinium
- Terbium
- Dysprosium
- Holmium
- Erbium
- Thulium
- Ytterbium
- Lutetium
- Hafnium
- Tantalum
- Tungsten
- Rhenium
- Osmium
- Iridium
- Platinum
- Gold
- Mercury
- Thallium
- Lead
- Bismuth
- Polonium
- Astatine
- Radon
- Francium
- Radium
- Actinium
- Thorium
- Protactinium
- Uranium
- Neptunium
- Plutonium
- Americium
- Curium
- Berkelium
- Californium
- Einsteinium
- Fermium
- Mendelevium
- Nobelium
- Lawrencium
- Rutherfordium
- Dubnium
- Seaborgium
- Bohrium
- Hassium
- Meitnerium
- Darmstadtium
- Roentgenium
- Copernicium
- Nihonium
- Flerovium
- Moscovium
- Livermorium
- Tennessine
- Oganesson
References
- D. J. Griffiths and D. F. Schroeter, Introduction to Quantum Mechanics, 3rd ed. (Cambridge, 2018).
- W. Kohn and L. J. Sham, Self-consistent equations including exchange and correlation effects, Physical Review 140, A1133 (1965).
- National Institute of Standards and Technology, Atomic Reference Data for Electronic Structure Calculations, Reference calculations for the Kohn–Sham solver.
- National Institute of Standards and Technology, Atomic Spectra Database, Measured line wavelengths and element data.
- E. Scerri, The Periodic Table: Its Story and Its Significance, 2nd ed. (Oxford, 2019).
- H. A. Bethe and E. E. Salpeter, Quantum Mechanics of One- and Two-Electron Atoms (Springer, 1957).
- K. S. Taber, Conceptualizing quanta: illuminating the ground state of student understanding of atomic orbitals, Chemistry Education Research and Practice 3, 145 (2002).
