OpenWorldLab

Loading interactive view…

Waves and antennas

The Yagi antenna

Shintaro Uda and Hidetsugu Yagi found in 1926 that unpowered rods beside a driven one shape its beam. Each picks up the wave and re-radiates it with a phase set by its length: a longer rod behind reflects, shorter rods in front direct. The result is the rooftop TV aerial.

Before you look

Predict first: You take away the directors and keep the reflector. Which way does the beam point?

What you are looking at

A driven element with a reflector and three directors at 1 GHz, in the extruded world.

The physics

Directivity DD is the power in the best direction over the average. A lone element has D≈2D \approx 2; the check measures the gain the extra elements add.

Going deeper

Vector calculus and Maxwell’s equations

Real Yagis use rods about 0.4 λ long and 0.3 λ apart. In the extruded world the elements are ribbons and couple much more strongly, so here the directors are shorter and closer.

What to measure

Forward gain over a lone element

  1. The checks compare forward gain and front-to-back ratio with a lone element.

What the model leaves out

  • The third dimension: these are strips, not rods.

Things to try

  • Add directors one by one and watch the beam narrow.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.