OpenWorldLab

Loading interactive view…

Waves and antennas

A waveguide

A metal pipe can carry microwaves with very little loss, but only if they fit: the electric field must vanish at the walls, so at least half a wavelength has to fit across. Below that cutoff frequency the wave dies away within a few centimetres.

Before you look

Predict first: You lower the frequency below 6.56 GHz. What happens?

What you are looking at

A guide 22.86 mm wide at 10 GHz, opening into free space.

The physics

fc=c2a,λg=λ1−(fc/f)2f_c = \frac{c}{2a}, \qquad \lambda_g = \frac{\lambda}{\sqrt{1 - (f_c/f)^2}}

aa is the guide’s width, fcf_c the cutoff frequency and λg\lambda_g the wavelength inside the guide.

Going deeper

Vector calculus and Maxwell’s equations

The wave can be seen as two plane waves zigzagging between the walls; near cutoff they bounce almost straight across and make little progress.

What to measure

Cutoff c/2a; guide wavelength

  1. The checks find the cutoff from the decay below it and the guide wavelength above it.

What the model leaves out

  • The guide’s narrow walls (it is a 2D slice) and wall losses.

Things to try

  • Sweep the frequency through 6.56 GHz.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.