Potential and conductors
A Van de Graaff generator
Robert Van de Graaff’s generator (1929) carries charge on a rubber belt up into a hollow metal dome. Charge put inside a conductor moves straight to its outside, so the belt can keep adding charge however high the dome’s voltage climbs, until the air around it breaks down. A grounded ball brought near offers the spark a short path.
Before you look
Predict first: Where does the spark go: to the ball or to the floor?
What you are looking at
A dome held at 300 kV beside a grounded ball, above a grounded floor, in the extruded world. While the clock runs, sparks grow by the dielectric breakdown model; the trigger tallies where they land.
The physics
A sphere’s surface field is V/R, so a bigger dome holds a higher voltage: about 300 kV for a 10 cm radius.
Going deeper
Vector calculus and Maxwell’s equations
Large Van de Graaff machines in pressurised gas reached over 20 MV and accelerated ions for nuclear physics.
What to measure
Sparks land on the ball
- The check grows four sparks and counts how many reach the ball.
What the model leaves out
- The belt and the dome’s charging: here the dome is held at 300 kV. The breakdown model has no time or current.
Things to try
- Move the ball further away and watch sparks start to find the floor.
- Lower the branching exponent for wilder sparks.
References
- E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.
More experiments, and how the lab works, are in the lab’s overview.
