Waves and antennas
Echoes on a transmission line
At high frequencies a pulse travels along a cable as a wave, and wherever the impedance changes, some of it reflects. An open end sends the pulse back whole, a short sends it back upside down, and a load equal to the line’s impedance swallows it. This is why cables are terminated and radio feeds are matched.
Before you look
Predict first: The line ends in a 150 Ω resistor on a 50 Ω line. What comes back?
What you are looking at
A pulse on a 50 Ω parallel-plate line, seen side-on, running to a load you choose.
The physics
is the share of the pulse’s voltage that comes back, the load’s impedance and the line’s.
Going deeper
Vector calculus and Maxwell’s equations
Time-domain reflectometers find faults in buried cables by timing echoes like these.
What to measure
Γ = (Z_L − Z₀)/(Z_L + Z₀); speed c/√ε_r
- The checks measure Γ for each load and the pulse’s speed.
What the model leaves out
- Losses in the conductors: the line is perfect.
Things to try
- Fill the line with a dielectric and watch the pulse slow.
References
- D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
More experiments, and how the lab works, are in the lab’s overview.
