Waves and antennas
The skin depth
In a conductor, the wave’s electric field drives currents, and the currents waste its energy as heat. The wave dies away exponentially, falling by a factor of e (about 2.7) every skin depth. Copper at mains frequency has a skin depth of 9 mm; at 1 GHz, 2 µm, which is why microwave parts are silver-plated.
Before you look
Predict first: You raise the frequency four times. What happens to the skin depth?
What you are looking at
A 1 GHz wave hitting a slab conducting like sea water (1 S/m), so the skin depth is millimetres on a 30 cm wave.
The physics
is the conductivity, the permeability and the angular frequency.
Going deeper
Vector calculus and Maxwell’s equations
Submarines talk on very low frequencies for this reason: at 10 kHz the sea’s skin depth is a couple of metres.
What to measure
Decay length δ = √(2/ωμσ)
- The checks fit the decay length and the phase turn inside the slab.
What the model leaves out
- Copper’s real conductivity: it would need cells a million times smaller.
Things to try
- Raise the conductivity and watch the wave die sooner.
References
- D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
More experiments, and how the lab works, are in the lab’s overview.
