OpenWorldLab

Loading interactive view…

Capacitors and dielectrics

Charging a capacitor

A capacitor charged through a resistor fills quickly at first and then ever more slowly, because the fuller it is the less voltage is left to push current through the resistor. The time scale is the product RC.

Before you look

Predict first: After one time constant RC, how far has the capacitor charged towards the battery’s 6 V?

What you are looking at

A 6 V battery, a switch, a 10 kΩ resistor and a 100 µF capacitor in a loop, with a voltmeter across the capacitor. Click the switch to close it.

Dots on the wires move with the current: fast at first, then slowing to a stop as the capacitor fills. The capacitor’s plates tint red and blue with their charge.

The physics

Round the loop the battery’s voltage is shared between the resistor and the capacitor, V0=IR+Q/CV_0 = IR + Q/C, with I=dQ/dtI = dQ/dt. Its solution, starting empty, is

VC(t)=V0(1−e−t/RC),I(t)=V0R e−t/RCV_C(t) = V_0\left(1 - e^{-t/RC}\right), \qquad I(t) = \frac{V_0}{R}\,e^{-t/RC}

With 10 kΩ and 100 µF the time constant is RC=1RC = 1 s. Half the energy the battery delivers ends up in the capacitor, 12CV02\tfrac12 CV_0^2; the other half heats the resistor, whatever R is.

Going deeper

Vector calculus and Maxwell’s equations

Between the plates there is no current, yet Ampère’s law still holds there: the changing electric field is a displacement current ε0 ∂E/∂t\varepsilon_0\,\partial\mathbf E/\partial t equal to the current in the wire. Maxwell added that term, and with it light became an electromagnetic wave.

What to measure

V(t) = V₀(1 − e^(−t/RC))

  1. Close the switch and read the voltmeter one second later: it should show about 3.79 V.
  2. Read it again at three seconds: 95% of 6 V, about 5.70 V.
  3. Check one reading against V0(1−e−t/RC)V_0(1 - e^{-t/RC}).

What the model leaves out

  • Wires are perfect conductors with no inductance of their own, and nothing radiates: the circuit is lumped, which is right while it is much smaller than a wavelength.
  • The capacitor is a symbol with a value, not two plates whose field Engine C computes; the gap’s field is not drawn on the board.

Things to try

  • Halve the resistance: the capacitor charges twice as fast, and the first rush of current is twice as big.
  • Give the capacitor a starting voltage above 6 V: it discharges into the battery instead.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
  • E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.
  • P. Horowitz and W. Hill (2015), The Art of Electronics, 3rd edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.