OpenWorldLab

Loading interactive view…

Capacitors and dielectrics

The parallel-plate capacitor

Two plates with opposite charge store energy in the field between them. Far from the edges the field is uniform, V/d. At the edges it bulges outwards, the fringing field, which holds extra charge: the real capacitance is a little more than ε₀A/d.

Before you look

Predict first: You halve the gap at the same voltage. What happens to the charge on the plates?

What you are looking at

Plates 40 cm wide, 4 cm apart, at +50 V and −50 V, seen end-on in the extruded world.

The physics

C=ε0wd[1+dπw(1+ln⁡2πwd)]C = \frac{\varepsilon_0 w}{d}\left[1 + \frac{d}{\pi w}\left(1 + \ln\frac{2\pi w}{d}\right)\right]

This is per metre of length, for plates of width ww a gap dd apart (Palmer 1937). The second term in the bracket is the fringing.

Going deeper

Vector calculus and Maxwell’s equations

The energy, 12CV2\tfrac12CV^2, is stored in the field: 12ε0E2\tfrac12\varepsilon_0E^2 per volume, almost all between the plates.

What to measure

C per metre against ε₀w/d and fringing

  1. The check reads the charge on the top plate and divides by the 100 V between them.

What the model leaves out

  • The plates’ thickness, which Palmer’s formula ignores; it adds about a per cent here.

Things to try

  • Drag the plates apart and watch the field leak out of the gap.

References

  • E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.
  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.