OpenWorldLab

Loading interactive view…

Waves and antennas

Inside a microwave oven

A microwave oven is a metal box, so its waves reflect back and forth into standing waves with hot and cold spots. That is why ovens have turntables, and why a bar of chocolate left still melts in spots: about 6 cm apart, half a wavelength. Measure the spacing and the frequency printed on the oven gives you the speed of light.

Before you look

Predict first: The oven runs at 2.45 GHz. How far apart are the melted spots?

What you are looking at

A slice through an oven cavity with a chocolate bar near the floor. The glow shows the time-averaged field, where heating happens.

The physics

d=λ2=c2f  ⇒  c=2fdd = \frac{\lambda}{2} = \frac{c}{2f} \;\Rightarrow\; c = 2fd

Going deeper

Vector calculus and Maxwell’s equations

The bar is lossy: its water and fats absorb the field, which damps the standing wave a little.

What to measure

Hot spots λ/2 apart; c = 2fd

  1. The checks count the hot spots along the bar and work out c = 2fd.

What the model leaves out

  • The third dimension and the oven’s mode stirrer; the bar’s properties are plausible values, not measured chocolate.

Things to try

  • Change the frequency a little and watch the pattern shift.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.