OpenWorldLab

Loading interactive view…

Potential and conductors

Image charges

A charge near grounded metal pulls opposite charge onto the surface beneath it. Working out how that charge spreads looks hard, but there is a trick: above the metal, the field is exactly what you would get with the metal removed and an opposite charge placed as far below the surface as the real one is above. The image does the work of all the induced charge.

Before you look

Predict first: How much charge gathers on the metal’s surface, in total?

What you are looking at

A line charge of 1 nC/m 10 cm above a grounded metal block, in the extruded world.

The physics

V(x,y)=λ2πε0ln⁡rimager,σ(x)=−λdπ(x2+d2)V(x,y) = \frac{\lambda}{2\pi\varepsilon_0}\ln\frac{r_\text{image}}{r}, \qquad \sigma(x) = -\frac{\lambda d}{\pi(x^2+d^2)}

Here λ\lambda is the line’s charge per metre and dd its height. The potential is zero on the surface (r=rimager = r_\text{image}), so this is a solution, and the uniqueness theorem says it is the only one.

Going deeper

Vector calculus and Maxwell’s equations

The charge is pulled towards the metal by its own image: force per metre λ2/(4πε0d)\lambda^2/(4\pi\varepsilon_0 d).

What to measure

The induced charge’s field is the image’s

  1. The check takes the field of the induced charge alone (the grid’s correction to the bare charge’s field) halfway down and compares it with the image’s.

What the model leaves out

  • The block’s ends: it is 1.2 m wide, so near the middle it acts as an infinite plane.

Things to try

  • Move the charge closer: the induced charge bunches beneath it.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.