Waves and antennas
The half-wave dipole
A wire half a wavelength long, fed in the middle, resonates: current sloshes from end to end in time with the drive and the wire radiates strongly. It is the antenna inside most radios and the building block of larger ones.
Before you look
Predict first: Along the line of the wire, how much does it radiate?
What you are looking at
A centre-fed wire at 1 GHz in the round world: the picture is a slice through the axis, mirrored, of a doughnut-shaped field.
The physics
is the wire’s length and . For the beam is 78° wide between its half-power directions, against 90° for a short dipole.
Going deeper
Vector calculus and Maxwell’s equations
Its radiation resistance is about 73 Ω, a good match for common feed cables.
What to measure
Pattern and 78° half-power beamwidth
- The check compares the far-field pattern with the thin-wire formula.
What the model leaves out
- The wire’s thickness and the feed gap’s details.
Things to try
- Make the wire 1.25 λ long: the main beam narrows and side lobes appear.
References
- D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
More experiments, and how the lab works, are in the lab’s overview.
