Currents and magnetism
Iron in a coil
Iron is full of tiny magnets, its atoms, which line up with a field. Inside a coil they add their own field to the coil’s. In a ball of iron the gain is limited by the ball’s own poles, which oppose it: the field inside is at most three times the coil’s. A long rod has its poles far apart and multiplies the field far more.
Before you look
Predict first: You raise μ_r from 1000 to 100 000. How much stronger does the field in the ball get?
What you are looking at
A solenoid 60 cm long with 600 turns carrying 2 A, and an iron ball 6 cm across at its centre, in the round world. The iron’s relative permeability, μ_r, is 1000.
The physics
Going deeper
Vector calculus and Maxwell’s equations
This is the demagnetising effect of the ball’s shape. A rod ten times longer than wide multiplies the field about 50 times; a closed iron ring, with no poles at all, by μ_r itself.
What to measure
B inside = 3μ_r/(μ_r + 2) B₀
- The check compares the field in the ball with the coil’s field there without it.
What the model leaves out
- Saturation, unless you set it: real iron stops near 2 T.
Things to try
- Change the ball to a long block: the field inside grows far beyond three times.
- Set saturation to 1.5 T and raise the current.
References
- D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
- E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.
More experiments, and how the lab works, are in the lab’s overview.
