OpenWorldLab

Loading interactive view…

Charge and Coulomb’s law

Coulomb’s law

Two charges push or pull on each other along the line between them, and the force falls off with the square of the distance. Charles-Augustin de Coulomb measured it in 1785 with a torsion balance; here you can measure it by dragging.

Before you look

Predict first: You halve the distance between the two charges. What happens to the force?

What you are looking at

A fixed charge QQ of 5 nC sits on the left. The small yellow dot is a test charge of 1 pC, too small to disturb anything; the arrow from it is the force it feels, and its pill gives the size.

The flowing light and the amber lines show the field of QQ. The test charge feels that field: F=qE\mathbf F = q\mathbf E.

The physics

Coulomb’s law gives the force between two point charges a distance rr apart:

F=14πε0 Qqr2=k Qqr2,k≈8.99×109 N m2/C2F = \frac{1}{4\pi\varepsilon_0}\,\frac{Qq}{r^2} = k\,\frac{Qq}{r^2}, \qquad k \approx 8.99\times10^{9}\ \mathrm{N\,m^2/C^2}

Like charges repel, unlike charges attract. Two 1 C charges a metre apart would push each other with 9 billion newtons, which is why everyday charges are measured in nanocoulombs.

Going deeper

Vector calculus and Maxwell’s equations

The same law written as a field: the charge QQ makes E=kQr^/r2\mathbf E = kQ\hat{\mathbf r}/r^2 everywhere, and any charge qq placed there feels qEq\mathbf E. The field is the more useful idea: it carries energy and, when charges move, it carries news of the motion at the speed of light.

What to measure

Force F = kQq/r² on the test charge

  1. Read the force with the test charge 30 cm from QQ.
  2. Drag it to 15 cm. The force should be four times bigger.
  3. Check one reading against kQq/r2kQq/r^2 with a calculator.

What the model leaves out

  • Fields follow the charges instantly. That is right while charges move much slower than light; the radiation experiments show what changes when they don’t.
  • The test charge is too small to move QQ or change its field, as an ideal test charge should be.

Things to try

  • Make QQ negative in the inspector: the arrow turns round.
  • Switch the world to “2D, extruded”: the charges become lines, and the force now falls as 1/r1/r, not 1/r21/r^2.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
  • E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.