OpenWorldLab

Loading interactive view…

Potential and conductors

Charging by induction

You can charge a piece of metal without touching it. Bring a charged rod near and the metal’s free electrons rearrange: the near side takes the opposite charge, the far side the same. Connect the metal to the ground and the far side’s charge drains away, leaving a net charge. Lift the ground connection first, then take the rod away: the charge is trapped and spreads over the sphere.

Before you look

Predict first: The rod is positive. What charge is the sphere left with?

What you are looking at

A +2 nC/m rod beside a grounded metal sphere (a cylinder in the extruded world), with induced charge marked on its surface. In the inspector, switch the sphere between grounded and floating, and delete the rod, to walk through the steps.

The physics

Grounded, the sphere sits at zero potential and takes whatever charge makes that so: here, negative. Floating, its total charge is fixed and only moves about on its surface.

Going deeper

Vector calculus and Maxwell’s equations

Electrophori and the Van de Graaff generator both charge by induction, again and again.

What to measure

The sphere keeps the charge it took while grounded

  1. The check solves the four steps and confirms the sphere keeps exactly the charge it took while grounded.

What the model leaves out

  • Anything nearby but the rod: the open boundary puts the rest of the world far away.

Things to try

  • Take the rod away before lifting the ground: the charge drains back and nothing is left.

References

  • E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.

More experiments, and how the lab works, are in the lab’s overview.