Currents and magnetism
From a loop to a solenoid
Bend a wire into a loop and its field bunches up inside it. Wind many loops into a coil, a solenoid, and the field inside becomes strong and nearly uniform, while outside it looks just like a bar magnet’s.
Before you look
Predict first: You double the solenoid’s length but keep the same number of turns. What happens to the field at its centre?
What you are looking at
On the left, one loop of 10 A seen edge-on: ⊙ above, ⊗ below. On the right, a solenoid of 200 turns carrying 2 A. Probes sit at both centres.
The physics
For a solenoid of finite length the centre field is a little less: .
Going deeper
Vector calculus and Maxwell’s equations
Ampère’s law round a rectangle with one side inside a long solenoid gives directly: outside, the field is negligible, and the sides across the wall contribute nothing.
What to measure
B at the loop’s centre μ₀I/2a; inside the solenoid μ₀nI·L/√(L²+4R²)
- Compare each probe with its formula.
- Change the number of turns and watch the coil’s probe follow.
What the model leaves out
- The solenoid is drawn as up to 48 discrete loops carrying all its ampere-turns. Inside, away from the windings, this matches a smooth winding to well under a per cent.
Things to try
- Turn on the compasses in View and walk them round the solenoid.
- Put the loop inside the solenoid.
References
- D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
- E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.
More experiments, and how the lab works, are in the lab’s overview.
