OpenWorldLab

Loading interactive view…

Induction and circuits

A generator

Turn a coil between magnets and the flux through it rises and falls twice each turn: an alternating EMF. Every power station works this way. Light a lamp from it and the coil gets harder to turn, because the lamp’s energy has to come from somewhere.

Before you look

Predict first: You crank the coil twice as fast. What happens to the EMF’s peak?

What you are looking at

Two magnets, north to the right, make a field across the gap. A 600-turn coil 3 cm across spins in it twenty times a second (at a twentieth of real time, one turn a second on screen). It drives a small lamp, with a voltmeter across.

Seen from the front the coil narrows to a line and opens to an ellipse as it turns. The current dots reverse each half turn. The coil’s pill shows the power the crank puts in.

The physics

At angle θ=ωt\theta = \omega t the flux through N turns of area A in a uniform field B is NBAcos⁡ωtNBA\cos\omega t, so

E=NBAωsin⁡ωt\mathcal E = NBA\omega\sin\omega t

With 600 turns, a field of 0.029 T at the centre and ω = 2π × 20 s⁻¹, that is a peak of 1.55 V. The lab measures 1.46 V: the field is weaker towards the coil’s rim than at its centre.

The current I in the coil feels a torque in the field, always against the turning. The crank does work ∫τ dθ\int\tau\,d\theta, and it equals the heat in the coil and the lamp.

Going deeper

Vector calculus and Maxwell’s equations

The torque on a current loop is μ×B\boldsymbol\mu\times\mathbf B with μ=NIA\mu = NIA. With the current in phase with the EMF (a resistive load), the mean power the crank supplies is 12E02/Rtotal\tfrac12\mathcal E_0^2/R_{\text{total}}. An open circuit costs nothing to turn: no current, no torque.

What to measure

EMF amplitude NBAω; the crank’s work becomes heat

  1. Read the voltmeter’s peak, or the coil’s EMF, and compare it with NBAω.
  2. Watch the crank power in the coil’s pill, then delete a wire to the lamp: it drops to zero.
  3. Double the crank speed and read the EMF again.

What the model leaves out

  • The coil’s leads stay put as it turns, as if on slip rings; real slip rings and brushes add a little resistance.
  • The crank keeps a perfectly steady speed whatever the load; a real hand slows down.
  • Coils, rings and magnets are filament loops, each standing for a bundle of turns or a slice of a magnet’s surface current. Very close to a loop the field is a little lumpy; a few loop spacings away it is exact.

Things to try

  • Turn one magnet round so like poles face each other: the field at the centre cancels, and so does the EMF.
  • Add turns: the EMF grows with N, and so does the coil’s resistance.

References

  • D. J. Griffiths (2017), Introduction to Electrodynamics, 4th edition, Cambridge University Press.
  • E. M. Purcell and D. J. Morin (2013), Electricity and Magnetism, 3rd edition, Cambridge University Press.
  • R. P. Feynman, R. B. Leighton and M. Sands, The Feynman Lectures on Physics, Volume II.

More experiments, and how the lab works, are in the lab’s overview.